Toshiba Magnia Z300 - Manual (Page 55)

Getting Started
Switching on the server
33
Switching on the server
NOTE: When turning on the server again, turn on the power
button at least 10 seconds after the power button was last
turned off. If the server is switched on again within 10 sec-
onds after it was switched off last, it may cause malfunction of
the server or trouble with it.
Turning on the server in the usual process
Usually turn on the server according to the following procedure:
1 Check to see if all of the peripheral devices such as a display,
keyboard, mouse, etc. are correctly connected with the server.
2 Check to see if the power cables of the System Unit and Exter-
nal Units are connected with AC outlets with the ground line or
an uninterruptible power supply (UPS).
Ensure that the power indicator ( ) lights up in amber.
3 Turn on the display.
4 Open the front panel.
5 Press the power/sleep button.
Ensure that the power indicator ( ) lights up in green.
Pressing the power/sleep button.