Toshiba Magnia Z300 User Manual
Page 265
243
ALARM (51)
Ex. Disk2 temp1 high.
The External Hard Drive Unit 2 high temperature error 1 has
occurred.
ALARM (52)
Ex. Disk2 AC lost.
Power interruption reset was detected on External Hard Drive
Unit 2.
ALARM (53)
Ex. Disk2 power sag.
Momentary power interruption was detected on External Hard
Drive Unit 2.
ALARM (54)
Ex. Disk2 power supply fault.
External Hard Drive Unit 2 power supply error.
ALARM (55)
Ex. Disk2 chassis intrusion.
An External Hard Drive Unit 2 cover has been opened.
ALARM (56)
Ex. Disk2 fuse blow out.
The External Hard Drive Unit 2 fuse has blown.
ALARM (57)
Ex. Device Bay1 +3.3V standby low.
Low voltage error of External Device Bay Unit 1+3.3V standby
power supply.
ALARM (58)
Ex. Device Bay1 +3.3V standby high.
High voltage error of External Device Bay Unit 1+3.3V standby
power supply.
ALARM (59)
Ex. Device Bay1 +5.0V low.
Low voltage error of External Device Bay Unit 1+5.0V power
supply.
ALARM (60)
Ex. Device Bay1 +5.0V high.
High voltage error of External Device Bay Unit 1+5.0V power
supply.
ALARM (61)
Ex. Device Bay1 +12.0V low.
Low voltage error of External Device Bay Unit 1+12.0V power
supply.
ALARM (62)
Ex. Device Bay1 +12.0V high.
High voltage error of External Device Bay Unit 1+12.0V power
supply.
ALARM (63)
Ex. Device Bay1 FAN1 RPM slow.
The External Device Bay Unit 1 fan 1 slow rpm error has
occurred.
ALARM (64)
Ex. Device Bay1 AC lost.
Power interruption reset was detected on External Device Bay
Unit 1.
ALARM (65)
Ex. Device Bay1 power sag.
Momentary power interruption was detected on External Device
Bay Unit 1.
ALARM (66)
Ex. Device Bay1 fuse blow out.
The External Device Bay Unit 1 power supply error.
ALARM (67)
Ex. Device Bay1 temp high.
The External Device Bay Unit 1 high temperature error.
ALARM (68)
Ex. Device Bay1 fuse blow out.
The External Device Bay Unit 1 fuse has blown.
ALARM (69)
Ex. Device Bay2 +3.3V standby low.
Low voltage error of External Device Bay Unit 2+3.3V standby
power supply.
ALARM (70)
Ex. Device Bay2 +3.3V standby high.
High voltage error of External Device Bay Unit 2+3.3V standby
power supply.
Display
Meaning of Message