Toshiba Magnia Z300 - Manual (Page 179)

System Configuration Setup
SCSI Utility
157
Specifies whether logical unit numbers are supported.
c Include in BIOS Scan : Yes
Specifies whether the device is to be scanned when SCSI
BIOS starts.
c Advanced Configuration Options
Sets up detailed data on the SCSI controller.
c Reset SCSI Bus at IC Initialization : Enabled
Specifies whether or not to reset the SCSI bus during the SCSI
controller resetting process.
c
Display Message
During BIOS Initialization
: Enabled
Sets data to be displayed in the SCSI Utility startup message.
c Extended BIOS Translation for
DOS Drive > 1Gbyte
: Enabled
Specifies whether extended BIOS is to be enabled or disabled
for a DOS drive with a disk capacity exceeding 1 GB.
c Verbose/Silent Mode: Verbose
Controls the data displayed during startup.
c Host Adapter BIOS : Enabled
Enables or disables the Host SCSI Adapter BIOS.
c Domain Validation : Enabled
Enables or disables the Domain Validation.
c Support Removable Disks Under
BIOS as Fixed Disks
: Boot Only
Specifies whether removable disks are to be supported under
SCSI BIOS.BIOS
c Support for Int13 Extensions : Enabled
Enables or disables Int13 Extension.