Toshiba Magnia Z300 - Manual (Page 57)

Getting Started
Starting up the system
35
Starting up the system
The “Toshiba Server Setup Tool” is to be used for almost all of
setup procedures for this system, such as installing the operating
system (OS), making backup floppy disks etc.
The “Toshiba Server Setup Tool” is comprised of the “Toshiba
Server Setup Tool CD-ROM” and “Startup Disk,” and the latter
(Startup Disk) is used to start up the server.
Besides the hard disk drive and floppy disk drive, the CD-ROM
drive can also be used to start up the server. In that case the ‘Star-
tup’ CD-ROM must be installed in the CD-ROM drive.
Starting up with the floppy disk
To start up the server from a floppy disk, proceed as follows:
1 Place the startup disk in the floppy disk drive.
2 Switch on the power/sleep button.