3 click “next” in the “update device driver wizard, 7 click “next, 8 click “finish” in the “finish screen – Toshiba Magnia Z300 User Manual
Page 201: 9 update other ethernet controller in same method, 10 restart computer, 5 install via 4in1 driver
Installing Software
Windows® 2000 Server
179
3 Click “Next” in the “Update Device Driver Wizard”.
4 Select “Search for a suitable driver for my device” , click Next
5 Set Server Setup Tool CD into CD-ROM drive, check at
“Specify a location”, click “Next”.
6 Type following driver pass to “Copy manufacture's files
from:”, then click “Next”
7 Click “Next”.
8 Click “Finish” in the “Finish screen”.
9 Update other Ethernet Controller in same method.
10 Restart computer.
Procedure after installation of the Windows 2000 Server
After the installation of the Windows 2000 Server is complete, fol-
low the procedure mentioned below:
1 Activate the Windows 2000 Server and log in the user ID of
the Administrator or a person having the competence equiva-
lent to that of the Administrator.
2 If no network has been built up, set up the network.
3 If no TCP/IP has been set for the network, set it.
See “Windows 2000 Server User's Guide or Help” for details
of TCP/IP setting.
4 Install the SNMP Service in the network.
For installing the SNMP Service, use “Services,” which can be
opened by selecting “Control Panel,” “Network” and “Ser-
vices” of the Windows 2000 Server in this order.
See “Windows 2000 Server User's Guide or Help” for details
of installation.
5 Install VIA 4in1 Driver.