Konica Minolta BIZHUB C30P User Manual
Page 89
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 75
Specifying Pager Notification Settings
To specify settings for pager notification, follow this procedure:
1
In the navigation pane, expand the top-level Configuration node and click Alarm Notifi-
cation Methods.
2
Click the Settings . . . button next to the Pager check box. The Pager Notification Set-
tings appear at the bottom of the details pane (Figure 2.23).
Figure 2.23: MMC Pager Notification Settings
3
Specify primary recipients by doing one or both of the following:
•
To add a recipient to the Pager List:
a. In the Pager ID box, type a pager ID (typically a 10- or 11-digit phone number).
b. In the Pager Service list, click the name of the paging service to be used.
c. Click the adjacent Add button.
•
To remove a recipient from the Pager List: Click the pager ID; then click the adjacent
Remove button.
4
In the From box, type the name that will appear as the originator of all alarm page mes-
sages sent by MetaConsole. Typically, this is a network administrator’s name.
5
In the Subject box, type the text that will appear in the Subject field of all page messages