Figure 2.32) – Konica Minolta BIZHUB C30P User Manual
Page 105
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 91
Figure 2.32: Unicenter Email Notification Settings
7
In the Subject box, type the text that will appear in the Subject field of all alarm email mes-
sages sent by MetaConsole. Typically, this text should indicate the type of message (e.g.,
Device Alert).
8
In the Relay Server box, type the name or IP address of the local network’s email (SMTP)
server.
Note: Email notification cannot be delivered if this information is missing or incorrect.
9
To send a test email message to the recipients specified in steps 4, 5, and 6, select the
Test Email on Apply check box.
Note:
If the Test Email on Apply checkbox is selected, then every time the Apply button is
clicked, a test email will be sent to all the recipients. The test email is not sent out at any
other time. To deactivate this, deselect the checkbox.
10
Click Apply.