Konica Minolta BIZHUB C30P User Manual
Page 53
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 39
•
To add a recipient to the To: List: In the To: Email Address box, type an email ad-
dress then click the adjacent Add button.
•
To remove an address from the To: List: Click the address then click the adjacent
Remove button.
5
Specify the Cc (carbon copy) recipients by doing one or both of the following:
•
To add a recipient to the Cc: List: In the Cc: Email Address box, type an email ad-
dress then click the adjacent Add button.
•
To remove an address from the Cc: List: Click the address then click the adjacent
Remove button.
6
Specify Bcc (blind carbon copy) recipients by doing one or both of the following:
•
To add a recipient to the Bcc: List: In the Bcc: Email Address box, type an email ad-
dress then click the adjacent Add button.
•
To remove an address from the Bcc: List: Click the address then click the adjacent
Remove button.
7
In the From box, type the name that will appear in the From field of all alarm email mes-
sages sent by MetaConsole. Typically, this is a network administrator’s name.
8
In the Subject box, type the text that will appear in the Subject field of all alarm email mes-
sages sent by MetaConsole. Typically, this text should indicate the type of message (e.g.,
Device Alert).
9
In the Relay Server box, type the name or IP address of the local network’s email (SMTP)
server.
Note: Email notification cannot be delivered if this information is missing or incorrect.
10
To send a test email message to the recipients specified in steps 4, 5, and 6, select the
Test Email on Apply check box.
Note:
If the Test Email on Apply checkbox is selected, then every time the Apply button is
clicked, a test email will be sent to all the recipients. The test email is not sent out at any
other time. To deactivate this, deselect the checkbox.
11
Click Apply.