Konica Minolta BIZHUB C30P - Manual (Page 121)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 107
Figure 2.39: Blocked Ranges Screen
3 Locate the Add New Blocked Range field. Enter the lowest IP address of the range in the
Start Address box.
4 Enter the highest IP address of the range in the End Address box.
5 Click Add.
Deleting an Excluded Range
To remove a range from the list of excluded ranges, follow this procedure:
1 In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2 Click Blocked Ranges.
The Blocked Ranges screen opens (Figure 2.39).
3 Locate the Blocked Discovery Range List field. Click the start or end address of the
range to be removed.
4 Click Remove.