Changing device settings, Settings page – Konica Minolta BIZHUB C30P User Manual
Page 145
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 131
Settings Page
From the Settings page a user may input or modify specific Device settings for the selected
device. Certain devices may also display selected Finisher Settings (as shown in Figure 3.12).
Note
: Modification of values on this page requires that the user has set up the Write Com-
munity String for this device correctly on the Write Community Page.
To access this page, follow this procedure:
1
In the Tree Pane, expand the device’s node.
2
Click on Settings. The Settings page will open in the right pane (Figure 3.12).
Figure 3.12: Settings Page
Changing Device Settings
To modify a device’s settings, follow this procedure:
1
In the Tree Pane, expand the device’s node.
2
Click on Settings.
3
In the Device Name field, enter a name for the device.
4
In the Location field, enter a description of the device’s location.
5
In the Contact Name field, enter the name of the person who is in charge of the device.
6
In the Contact Number field, enter the phone number of the contact person.