Manually adding or removing individual devices, Manually adding a device, Deleting a manually added device – Konica Minolta BIZHUB C30P User Manual
Page 122: Manually adding or removing individual
Configuring MetaConsole
page 108
Manually Adding or Removing Individual Devices
In addition to specifying address ranges for automatic device discovery, you can manually add
addresses to the list of discovered devices.
Manually Adding a Device
To manually add a device to the device list, follow this procedure:
1
In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2
Click Manual Discovery.
The Manual Discovery screen opens (Figure 2.40).
Figure 2.40: Manual Discovery Screen
3
Enter the device’s IP address in the Device Address box.
4
Click Add.
Deleting a Manually Added Device
To delete a manually added device from the device list, follow this procedure:
1
In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2
Click Manual Discovery.