Konica Minolta BIZHUB C30P - Manual (Page 154)

Using PageScope EMS Plug-Ins
page 140
Write Community Page
The Write Community string is used while writing SNMP data to a device. You must set it cor-
rectly in order to change any device information. This can be done from the Write Community
page.
To set the device’s Write Community string, follow this procedure:
1 In the Tree Pane, expand the device’s node then click Write Community. The Write Com-
munity page will open in the right pane (Figure 3.22).
Figure 3.22: Write Community Page
2 In the Write Community field, select one of the following options:
a. If the Konica Minolta device is black and white, the default Write Community string
sysadm should automatically appear in the field. If not, enter it.
b. If you have a Konica Minolta color machine, the default Write Community string sysadm
cannot be used since it will then prevent you from seeing all the data on the Settings and
Networking pages/nodes. If this occurs with a color printer, change the Write Community
string to public. This should remedy any omitted data.
Note: Read/Write privileges granted by the Write Community string may only work locally
for color devices. In other words, any device changes you make will only be stored locally
on the server. If you access MetaConsole from any other browser, the default settings will
still apply.
3 Click Apply.