Konica Minolta BIZHUB C30P - Manual (Page 72)

Configuring MetaConsole
page 58
Specifying Pager Notification Settings
To specify settings for pager notification, follow this procedure:
1 Display the appropriate MetaConsole client page in one of these ways:
• Point your browser to the MetaConsole server. In the navigation pane, expand the top-
level Configuration node and click Alarm Notification Methods.
• When a managed device is selected in NetView, select MetaConsole from the Tools
menu, then select MetaConsole Configuration. In the MetaConsole client’s naviga-
tion pane, click Alarm Notification Methods.
2 Click the Settings . . . button next to the Pager check box. The Pager Notification Set-
tings appear at the bottom of the details pane (Figure 2.14).
Figure 2.14: NetView Pager Notification Settings
3 Specify primary recipients by doing one or both of the following:
• To add a recipient to the Pager List:
a. In the Pager ID box, type a pager ID (typically a 10- or 11-digit phone number).
b. In the Pager Service list, click the name of the paging service to be used.
c. Click the adjacent Add button.
• To remove a recipient from the Pager List: Click the pager ID; then click the adjacent
Remove button.
4 In the From box, type the name that will appear as the originator of all alarm page mes-