Konica Minolta Darwin VDP Software - Manual (Page 82)

8. Measure the distance between the new ruler guide on the right (the
green ruler guide) to the margin on the left (the orange line). This
measurement represents the width of the new plot area. In this
example, the width of the new plot area is 58 mm.
9. Measure the distance between the new ruler guide at the top of the
plot area (the green ruler guide) to the margin at the bottom of the
chart (the orange line). This measurement represents the height of
the new plot area. In this example, the width of the new plot area is
51 mm.
10. In Darwin Pilot, under Chart Display Options, select Chart
Dimensions.
11. In the Width of plot area box, type 58 .
74 Chapter 9—Working with charts