Konica Minolta bizhub C650 - Manual (Page 9)

C650 x-8
Contents
Introduction
Thank you for your purchase of this machine.
This User’s Guide describes operating procedures and precautions for the use of Network fax functions
(Internet Fax/IP Address Fax). Be sure to read this Guide.
After reading the User’s Guide, store it in the designated holder so that it can be easily referred to make best
use of the Internet Fax and IP Address Fax functions.
To ensure that this machine is used correctly and safely, carefully read the Quick Guide
[Copy/Print/Fax/Scan/Box Operations] before using the machine.
ACKNOWLEDGEMENT:
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or
trademarks of KONICA MINOLTA HOLDINGS, INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS
TECHNOLOGIES, INC.
Adobe, the Adobe logo, Acrobat and PostScript are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Other company names and product names used in this User’s Guide are the registered trademarks or
trademarks of their respective companies.
COPYRIGHT
© 2007 by KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. All Rights Reserved.
EXEMPTION
A part or this User’s Guide may be used or duplicated without permission.
Information written in this User’s Guide is subject to change without notice.
Special Notice to User
For Canada
NOTICE:
This product meets the applicable Industry Canada technical specifications.The Ringer Equivalence Number
is an indication of the maximum number of devices allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of devices subject only to the requirement that
the sum of the RENs of all the devices does not exceed five.
AVIS:
Le present materiel est conforme aux specifications techniques applicables d’Industrie Canada.
L’indice d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre
raccordes a une interface telephonique. La terminaison d’une interface peut consister en une combinaison
quelconque de dispositifs, a la seule condition que la somme d’indices d’equivalence de la sonnerie de tous
les dispositifs n’excede pas 5.
For U.S.A.
FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
cover of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If required, this information must be provided to the telephone company.
This equipment uses certification jack USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation instructions for details.