Konica Minolta bizhub C650 User Manual
Page 40
C650
2-8
Transmission
2
6
Specify the IP Address of the recipient.
–
- Address Book
- Direct Input
- Address Search
- Group destination
- Program destination
–
For details of procedure for specifying the IP address, refer to the "Specifying only one destination"
on page 2-17 and "Specifying multiple destinations (broadcast transmission)" on page 2-26.
–
Re-select the destination to be cancelled to cancel the selected destination.
–
All entered numbers and selected settings are cleared on pressing [Reset] key.
–
If "Manual Destination Input" in Utility mode is set to "Restrict" or if "Manual Destination Input" in
the Default Function Permission screen (displayed from the User Authentication Settings screen) is
set to "Restrict", the [Direct Input] tab and [Address Search] tab do not appear. For details on the
"Manual Destination Input" parameter, refer to "Prohibiting the direct input of fax number (Manual
Destination Input)" on page 9-71. For details on the parameters available in the User Authentication
Settings screen, refer to the User’s Guide [Copy Operations].
–
Touch [Color] on the IP Address Fax screen to send a color fax.
–
IP Address of recipient can be easily specified on registering the IP Address of recipient to the
Address Book, Group destination, and Program destination. For details on Address Book, Group
destination, and Program destination, refer to the "8 Registering/Settings".
Entered destination is displayed in the left panel of broadcast destination list.
7
Press [Start] key.
–
When the Destination Check Display Function is set, the Destination Settings screen is displayed.
Confirm that the destination is correct and touch [Send]. For details, refer to the "Sending the fax
after reconfirming the destination (Destination Check Display Function)" on page 6-33.
–
Press [Stop] key when the fax sending is aborted.
Scanning of the original begins, and the original is sent.
!
Detail
If the fax cannot be sent, refer to "Fax cannot be sent (IP Address Fax)" on page 4-3.
If the fax could not be sent, a TX Result Report is printed (when specified as to print the TX Result
Report). For details on printing report procedure, refer to the "Specifying Report Printing Methods
(Report Setting)" on page 9-65.
For details on TX Result Report, refer to the "TX Result Report" on page 10-7.