Konica Minolta bizhub C650 - Manual (Page 112)

C650 6-9
Useful transmission functions 6
6.4 Sending the fax after erasing shadows (Frame Erase)
Frame Erase
When the original is scanned while the ADF is open, there may be a black shadow around the original at the
time of scanning the booklet original and the original may be faxed with that black shadow. Frame Erase
function erases the black shadow on Top, Bottom, Right, and Left of original when a booklet is scanned.
2
Note
Can be used in both original glass and ADF.
The frame erase quantity can be set within a range of 0.1 - 50 mm (1/16 - 2 inch) with a scale of 0.1 mm
(1/16 inch).
Initial Frame Erase value at the time of purchase: 5.0 mm (3/16 inch)
Following functions cannot be used simultaneously.
Long Original
Sending a fax after setting the Frame Erase
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on page 2-9.
3
Touch the buttons in order of [Scan Settings], [Erase].
4
Touch [Frame Erase].
5
Select [Top], [Left], [Right], [Bottom], [Frame] and set the respective erase values.
Ordinary
transmission
Frame erasure
transmission
Width of
erasure