Konica Minolta bizhub C650 - Manual (Page 139)

C650 6-36
Useful transmission functions 6
– To directly enter the body, touch [Direct Input], enter the body and touch [OK].
12
Touch [Close].
Returns to Communication Settings screen.
13
Touch [Close].
Returns to Fax/Scan screen.
14
Set other functions if required.
– For details on Scan Settings, refer to "Specifying the scan conditions" on page 2-14 or "Original
Settings" on page 6-3.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
15
Press [Start] key.
– To stop the transmission, refer to "Stopping the transmission" on page 2-38.
– When fax cannot be sent, refer to "Troubleshooting" on page 4-2.
The scanned original is stored in the memory as a scheduled job and transmission is started.
2
Note
Regardless of the From setting, the e-mail address specified in the Administrator Registration screen
of Utility mode is used as the From address.
For details on "Administrator Registration", refer to "Registering E-mail address of this machine (Input
Machine Address)" on page 9-38.