Konica Minolta bizhub C650 - Manual (Page 122)

C650 6-19
Useful transmission functions 6
6
Touch [Close].
Returns to Scan Settings screen.
7
Touch [OK].
Returns to Fax/Scan screen.
8
Set other functions if required.
– For details on Scan Settings, refer to "Specifying the scan conditions" on page 2-14 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
9
Specify the destination.
– For details on specifying destination, refer to "Specifying only one destination" on page 2-17 and
"Specifying multiple destinations (broadcast transmission)" on page 2-26.
10
Press [Start] key.
– To stop the transmission, refer to "Stopping the transmission" on page 2-38.
– When fax cannot be sent, refer to "Troubleshooting" on page 4-2.
The scanned original is stored in the memory as a scheduled job and transmission is started. It is copied
at the same time.