Konica Minolta bizhub C650 - Manual (Page 28)

C650 1-10
Before use 1
1.6 Initial Settings
Required Settings (Internet Fax)
2
Reminder
In order to use the Internet Fax functions, a technical expert must install the settings. Contact your
technical representative for details.
!
Detail
For details on setting methods, refer to "9 Utility mode".
After installation, settings must be specified for the following in order to use the Internet Fax functions. If the
following settings are not correctly made, fax communications may not be possible. Please ensure these
settings are registered.
Administrator/Machine Settings
- Input Machine Address
E-mail Address
Network Settings
- TCP/IP settings
- E-Mail settings
E-mail TX (SMTP)
E-mail RX (POP)
- Network Fax Settings > Network Fax Function Settings > Internet Fax Function (ON/OFF
*
)
Fax Settings
- Header Information
Sender
- Report Settings
Network Fax RX Error Report (ON
* /OFF)
MDN Message (ON
*
/OFF)
DSN Message (ON/OFF
*
)
Print E-mail Message Body (ON * /OFF)
- Network Fax Settings
Internet Fax Self RX Ability
Internet Fax Advanced Settings
*
is a default value at the time of purchase.
2
Note
The settings of transmission source are same as normal G3 fax.
Required Settings (IP Address Fax)
2
Reminder
In order to use the IP Address Fax functions, a technical expert must install the settings. Contact your
technical representative for details.
Network Settings
- TCP/IP settings
- Network Fax Settings
Network Fax function Settings > IP Address Fax Function (ON/OFF
*
)
SMTP TX Settings (Port No., Connection Timeout)
SMTP RX Settings (ON
* /OFF, Port No., Connection Timeout)