Konica Minolta bizhub C650 - Manual (Page 189)

C650 9-8
Utility mode 9
Administrator Settings > Network Settings > Network Fax Settings > Network Fax Function Settings
The items related to network fax are set. (page 9-46)
Administrator Settings > Network Settings > Network Fax Settings
The items related to SMTP transmission and reception of IP address fax are set. (page 9-48)
Administrator Settings > Fax Settings > Header Information
Sender name and fax number are registered. (page 9-51)
Administrator Settings > Fax Settings > Header/Footer Position
The location where Header and Footer is added is specified. (page 9-54)
Item Description Values that can be set
Network
Fax Func-
tion Set-
tings IP Address FAX
Function When IP address fax is to be used,
set it to [ON]. ON/OFF*
Internet Fax
Functions When Internet Fax is to be used,
set it to [ON]. ON/OFF*
Item Description Values that can be set
SMTP TX
Settings Port No. The port number at the time of
SMTP transmission is set. 1 - 65535 (25*)
The port number setting is valid
only when IP address fax is used.
Connection
Timeout Connection timeout at the time of
SMTP transmission is set. 30 - 300 Seconds (60 seconds*)
SMTP RX Settings Whether or not to use the SMTP
function is set. ON*/OFF
Port No. The port number at the time of
SMTP reception is set. 1 - 65535 (25*)
The port number setting is valid
only when IP address fax is used.
Connection tim-
eout Connection timeout at the time of
SMTP reception is set. 5 - 1000 Seconds (300 seconds*)
Item Description Values that can be set
Sender Multiple sender names can be reg-
istered to be output to the docu-
ments sent to the receiver as
sender information. Within 30 single byte characters
Sender Fax No. Registered fax number is printed on
the documents received by the re-
cipient as Header information. Gen-
erally fax number of the machine is
entered.
Even in case of IP address fax, the
fax number registered as G3 fax is
notified to recipient as transmission
source information. Within 20 characters using 0 - 9, +,
space, * and #
Item Description Values that can be set
Header Position Position where Header is to be
printed is set.
[Outside Body Text] function can-
not be used in Internet Fax/IP Ad-
dress Fax. Header is added within
the original even if [Outside Body
Text] is set. European Models: Inside Body Text
/ Outside Body Text* / OFF
North American Models: Inside
Body Text / Outside Body Text*