Konica Minolta bizhub C650 - Manual (Page 20)

C650 1-2
Before use 1
1 Before use
1.1 Precautions (Internet Fax)
System requirements
2
Reminder
In order to use the Internet Fax functions, a technical expert must install the settings. Contact your
technical representative for details.
Internet Fax functions can be used under the following conditions.
- The machine is connected to a network, and is set to send and receive E-mail
- Specify the [Administrator Settings] - [Network Settings] - [Network Fax Settings] - [Network Fax
Function Settings] of [Utility mode] and set the [Internet Fax Function] to [ON].
!
Detail
For details on Network Fax Function Settings, refer to "Validating Network Fax function (Network Fax
Function Settings)" on page 9-46.
E-mail transmission and reception
The transmitted original (file attached to E-mail) may get damaged due to network conditions. Be sure that
the transmitted original is not damaged.
E-mail may not reach the recipient due to problems in the internet network pathway even if "----" is displayed
on the Transmission Result Screen (Job List > Job Details > Send > Job History list) or in the result column
of Activity Report. "----" displayed on the Transmission Result Screen or the Activity Report indicates that
the fax is sent properly. If the reception confirmation (MDN) is received, "OK" is displayed in Transmission
Result Screen or in the result column of Activity Report. Use G3 Fax to send and receive important contents.
2
Reminder
When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to
turn the machine on after turning it off. The machine may not operate correctly if it is turn on immediately
after being turned off.