Konica Minolta bizhub C650 - Manual (Page 120)

C650 6-17
Useful transmission functions 6
5
Touch the button for specifying original size as per the state of original.
– Touch [↑] or [↓] to display the next or previous fixed size screen.
– The following standard paper sizes are not available with fax transmissions.
A5 w, A6 w, 5-1/2 × 8-1/2 w/v, 7-1/4 × 10-1/2 w/v, 8K w, 16K w/v, 8 × 13 w, 4 × 6 w/v
For North American models (Inch)
6
Touch [OK].
Returns to Application screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen.
9
Set other functions if required.
– For details on Scan Settings, refer to "Specifying the scan conditions" on page 2-14 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
10
Specify the destination.
– For details regarding specifying destinations, refer to "Specifying only one destination" on
page 2-17 and "Specifying multiple destinations (broadcast transmission)" on page 2-26.
11
Press [Start] key.
– To stop the transmission, refer to "Stopping the transmission" on page 2-38.
– When you cannot send a fax, refer to "Troubleshooting" on page 4-2.
The scanned original is stored in the memory as a scheduled job and transmission is started.