Original settings, Original settings -3 – Konica Minolta bizhub C650 User Manual
Page 106
C650
6-3
Useful transmission functions
6
!
Detail
For details of "Basic Settings", refer to "Specifying the scan conditions" on page 2-14.
For details on [Separate Scan], refer to "Faxing a multi-page original from the original glass" on
page 2-10.
Set the [Fax TX Settings] of the Utility mode to [Do Not Cancel] to use the Annotation function and
Stamp/Composition function. For details, refer to "Specifying stamp printing specifications (Stamp
Settings)" on page 9-29.
When using the Internet fax or the IP address fax function and sending a fax by broadcast, the number
is not printed even if "Distribution Control Number" is specified in Header/Footer Setting.
Original Settings
2
Note
The following buttons cannot be used with the network fax function.
[Original Direction] under "Direction Settings"
[Total # of Pages (Quick Memory TX)]
Screen display
Description
"Special Original"
[Mixed Original]
When an original of varying sizes is loaded, this function detects
the original size in one operation and sends them.
[Z-Folded Original]
Function that faxes the pages whose paper size cannot be cor-
rectly detected as the pages are folded.
[Long Original]
Function that sends pages having a length of more than 432mm
(17 inch).
"Direction Settings"
[Binding Position]
When a duplex original is scanned by ADF, it adjusts top and
bottom margins of the back side of original by setting margins of
original.
[Despeckle]
Function that reduces the effect that the dust from the left parti-
tion glass has on the scan data when scanning an original from
the ADF.