Konica Minolta bizhub 20 - Manual (Page 56)

Scanning
48
2
Using the Scan key (For USB or Parallel cable users)
2
Note
• Parallel interface is not supported for Windows Vista
®
/Windows
®
7.
• If you use the Scan key when connected to a network, see Network Scanning on page 83.
• If the LCD shows error messages during scanning, see Troubleshooting in the User’s Guide or Error and
maintenance messages in the User’s Guide.
You can use Scan on the control panel to scan documents into your word processing, graphics or E-mail
applications or a folder on your PC.
Before you can use Scan on the control panel, you have to install the Multi-Function Suite and connect the
machine to your PC. If you installed the Multi-Function Suite from the included CD/DVD-ROM then the correct
drivers and ControlCenter3 are installed. Scanning by Scan follows the configuration on Device Button tab
of ControlCenter3. (See SCAN on page 62.) For details about how to configure the scan settings of the
ControlCenter3 buttons and to launch the application of your choice using Scan, see Using ControlCenter3
on page 59.
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from following table:
Document Layout Table
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
• The XPS file format is available for Windows Vista
®
/Windows
®
7 or when using applications which support
XML Paper Specification files.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)