Konica Minolta bizhub 20 - Manual (Page 24)

Printing
16
1
„ Booklet
When you want to do print a booklet, use this function. To make a booklet, fold the printed pages down in
the middle.
If you choose Booklet and click Duplex Settings... button, you can set the following settings.
• Duplex Mode
• Use Duplex Unit
In this mode, the printer prints on both sides of the paper automatically.
• Manual Duplex
In this mode, the printer prints all the even numbered pages first. Then the printer driver will stop and
show the instructions required to re-install the paper. When you click OK the odd numbered pages
will be printed.
• Duplex Type
There are two types of duplex binding directions available for each orientation.
• Binding Offset
If you check the Binding Offset option, you can also specify the offset for binding in inches or
millimeters.
Paper Source
1
You can choose Auto Select, Tray1, Tray2 1 , MP Tray or Manual and specify separate trays for printing the
first page and for printing from the second page onwards.
1 Available if the optional tray is installed.
Flip on Left Edge Flip on Right Edge