Konica Minolta BIZHUB C360 - Manual (Page 40)

bizhub C360/C280/C220 4-3
4
7 Reset Press this key to reset all settings (except pro-
grammed settings) entered using the Control Panel
and Touch Panel. p. 4-4
8 Interrupt Press this key to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the Inter-
rupt key lights up in green and the message [Now in
Interrupt mode.] appears in the Touch Panel. To
cancel Interrupt mode, press the Interrupt key
again. p. 4-4
9 Stop Pressing this key while copying, scanning or printing
temporarily stops the operation. p. 4-4
10 Proof Copy Press this key to print a single proof copy to be
checked before printing a large number of copies.
You can also display a finishing image using the cur-
rent settings in the Touch Panel. p. 4-18
11 Start Press to start the copy, scan or fax operation. p. 4-4
12 Data Indicator Flashes in blue while a print job is being received.
Lights up in blue when a print job is queued to be
printed or while it is being printed. The indicator
lights up in blue when there is saved fax data or un-
printed fax data. −
13 C (clear) Clears a value (such as the number of copies, a
zoom ratio and size) entered using the Keypad. p. 4-17
14 Keypad Allows you to specify the number of copies. Allows
you to enter the magnification. Allows you to enter
various settings. −
15 Guidance Switches to the Guidance screen. You can display
descriptions of the functions and operating proce-
dures. p. 4-15
16 Enlarge Display Enters Enlarge Display mode. If you are using Page-
Scope Authentication Manager for authentication,
the Enlarge Display screen will not be available. p. 4-14
17 Accessibility Press this key to display the screen for configuring
settings for user accessibility functions. p. 4-12
18 Access If user authentication or account track settings have
been applied, press the Access key after entering
the user name and password (for user authentica-
tion) or the account name and password (for ac-
count track) in order to use this machine. p. 4-8
19 Brightness dial Allows you to adjust the brightness of the Touch
Panel. −
20 User Box Press this key to enter User Box mode. While the
machine is in User Box mode, the indicator on the
User Box key lights up in green.
For details on User Box functions, refer to the [Us-
er's Guide Box Operations]. p. 4-5
21 Fax/Scan Enters Fax/Scan mode. While the machine is in
Fax/Scan mode, the indicator on the Fax/Scan key
lights up in green.
For details on the fax/scan function, refer to the [Us-
er's Guide Network Scan/Fax/Network Fax Opera-
tions]. p. 4-5
22 Copy Press this key to enter Copy mode. (The machine is
in Copy mode in default.) While the machine is in
Copy mode, the indicator on the Copy key lights up
in green. p. 4-5
No. Name Description Page