Konica Minolta BIZHUB C360 - Manual (Page 153)

bizhub C360/C280/C220 7-16
7.1 [System Settings] 7
6
Check that the black line aligns with the color line to be adjusted
at the X and Y positions of the test pattern.
% Press [+] or [-] to adjust the color line to be corrected while checking the sample.
The color registration is adjusted.
7
Press the Start key to print a test pattern, and then check the print result.
8
Press [OK].
[Gradation Adjustment]
Adjust irregular gradation levels of print images.
0 Adjust each correction item three times.
1
Turn off the Main Power Switch of this machine.
2
Wait at least 10 seconds, and then turn it on again.
3
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Gradation Adjustment].
4
Press the Start key.
The image stabilization operation starts.
The correction items on the Touch Panel become enabled.