Konica Minolta BIZHUB C360 - Manual (Page 143)

bizhub C360/C280/C220 7-6
7.1 [System Settings] 7
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Daylight Saving
Time].
7.1.5 [Weekly Timer Settings]
Configure the weekly timer in order to allow you to turn on and off this machine at the specified date and time.
0 An exact date/time setting must be performed in advance.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Weekly Timer Set-
tings].
Settings
Configure whether to use daylight saving time and the time difference from UTC (Coordinate Universal
Time).
Factory default
[Daylight Saving Time] [No]
Settings
[Weekly Timer ON/OFF
Settings] Configure whether to use the weekly timer function.
[Time Settings] Configure the time of each day of the week to turn on and off this machine.
[Set All] The setting for the selected day of the week is ap-
plied to the same day of the week in other weeks.
[Delete] Cancels the selected input value.
[Date Settings] Configure the days when timer operation is activated individually. To can-
cel the setting, press the same day again.
[Daily Setting] Configure the days of the week when the timer
operation is activated.