Konica Minolta BIZHUB C360 - Manual (Page 141)

bizhub C360/C280/C220 7-4
7.1 [System Settings] 7
7.1.2 [Output Settings]
Configure the settings for the output functions.
%
Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Output Settings].
Settings
[Print/Fax Output Settings] This setting is for the print and fax operations. For details, refer to the [Us-
er's Guide Network Scan/Fax/Network Fax Operations] and [User's Guide
Print Operations].
[Output Tray Settings] Configure an output tray given priority for outputting by function.
This item is displayed if the Finisher FS-527 or Job Separator JS-505 is
installed.
[Shift Output Each Job] Select whether to shift the output paper for each job.
This item is displayed if the Finisher FS-527, Finisher FS-529, or Job
Separator JS-505 is installed:
Factory default
[Print/Fax Output Settings] [Print]: [Page Print]
[Fax]: [Batch Print]
[Output Tray Settings] • [Copy]: [Tray 2]
• [Print]: [Tray 2]
• [Print Reports]: [Tray 1]
• [Fax]: [Tray 1]
[Tray 1] is displayed if the Job Separator JS-603 is installed in the Finisher
FS-527.
[Shift Output Each Job] [Yes]