Konica Minolta BIZHUB C360 - Manual (Page 186)

bizhub C360/C280/C220 7-49
7.10 [Security Settings] 7
If Enhanced Security settings is enabled, various security functions are configured to allow you to ensure
higher-level security of data management. For details, contact your service representative. To enable the en-
hanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6 [HDD Settings]
This setting is for the hard disk operations. For details, refer to the [User's Guide Box Operations].
[Network Settings] / [FTP Settings] /[FTP Server
Settings] [FTP Server Settings] is not displayed.
[Network Settings] / [SNMP Settings] / [SNMP
v1/v2c Settings] [Write Setting] is set to [Invalid].
[Network Settings] / [SNMP Settings] / [SNMP v3
Settings] In [Write User], [Security Level] cannot be set to
[OFF].
[Network Settings] / [TCP Socket Settings] [Use SSL/TLS] is set to [ON].
[Network Settings] / [WebDAV Settings] / [WebDAV
Server Settings] / [SSL Setting] Set to [SSL Only].
[System Connection] / [OpenAPI Settings] Set to [SSL Only].
[Security Settings] / [User Box Administrator Set-
ting] Set to [Restrict].
[Security Settings] / [Security Details] / [Password
Rules] Set to [Enable].
[Security Settings] / [Security Details] / [Prohibited
Functions When Authentication Error] Set to [Mode 2], and the number of tries is set to 3.
•
The number of tries can be changed to 1, 2, or
3.
[Security Settings] / [Security Details] / [Prohibited
Functions When Authentication Error] / [Release
Time Settings] The allowable setting range is limited to 5 or more
minutes. This value cannot be less than 5 minutes.
[Security Settings] / [Security Details] / [Confiden-
tial Document Access Method] Set to [Mode 2].
[Security Settings] / [Security Details] / [Print Data
Capture] Set to [Restrict].
[Security Settings]/[Security Details]/ [Hide Person-
al Information (MIB)] Set to [ON].
[Security Settings] / [Security Details] / [Initialize] /
[Network Settings] [Network Settings] is not displayed.
[Security Settings]/[Security Details]/ [Job History
Thumbnail Display] Set to [OFF].
[Security Settings] / [Image Log Transfer Settings] Set to [OFF].
Review [Secure Document User Box] Only the list is displayed before the password au-
thentication is performed.
[Network] in PageScope Web Connection / [E-
mail Setting] / [S/MIME] [Automatically Obtain Certificates] is set to [OFF].
[E-Mail Text Encrypt. Method] is set to [3DES].
[Maintenance] in PageScope Web Connection /
[Reset] / [Network Setting Clear] [Network Setting Clear] is not displayed.
[Security]/[Administrator Password Setting] in
PageScope Web Connection [Administrator Password Setting] is not displayed.
CS Remote Care Restricts the device setting in the remote mode
based on CS Remote Care.
Administrator Settings Settings to forcibly changed