Konica Minolta BIZHUB C360 - Manual (Page 140)

bizhub C360/C280/C220 7-3
7.1 [System Settings] 7
7.1 [System Settings]
Configure the basic functions of this machine.
7.1.1 [Power Save Settings]
Configure the settings for the power-saving mode.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Power Save Set-
tings].
Settings
[Low Power Mode Set-
tings] Enter a time period before switching to the lower power mode when this
machine is not being operated.
[Sleep Mode Settings] Enter a time period before switching to the sleep mode when this machine
is not being operated.
[Power Save Key] Configure the type of the power save function to be started when you press
the Power Save key.
[Low Power] Provides power-saving effect higher than normal.
[Sleep] Provides power-saving effect higher than the low
power mode. However, the machine must be
warm-up when restarting operations, therefore
taking more preparation time than the low power
mode.
[Enter Power Save Mode] Configure settings for switching to the power save mode after printing doc-
uments from computers or receiving faxes.
[Normal] Enters the power save mode when the time spec-
ified in Low Power Mode Settings has elapsed.
[Immediately] Enters the power save mode in a short time.
Factory default
[Low Power Mode Set-
tings] 15 min.
[Sleep Mode Settings] 20 min.
[Power Save Key] [Low Power]
[Enter Power Save Mode] [Immediately]