Sioux Chief Linear Shower Drain - StreamLine - Full Mortar Bed - Manual (Page 8)

Drain at Full Curb Entry
Layout 2
Shower Pan Liner must turn up the walls a minimum
of 3" above finished shower curb and 6" above floor in
showers without curbs.
Prior to installing Shower Pan Liner, install pre-formed
outside corners (available separately) following
manufacturer’s instructions. 2 per side.
Measure width of shower floor across drain base.
Measure up and over curb. Lay Shower Pan Liner flat.
Measure and mark Shower Pan Liner.
Cut, fold and crease to proper size and fit. Note: Do not
secure Shower Pan Liner at this time.
Note: Preformed curbs may also be used. See manufacturer’s instructions.
7. Prepare Shower Pan Liner
Drain at Back Wall
Layout 1
Shower Pan Liner must turn up the walls a minimum
of 3" above finished shower curb and 6" above floor in
showers without curbs. Measure width of shower floor
across drain base. Lay Shower Pan Liner flat. Measure
and mark Shower Pan Liner. Fold and crease for upturns
and create corners.
Note: Do not secure Shower Pan Liner at this time.
Tuck or Fold Fold
Inside Shower
Outside Corners
Under Membrane
6" min.
Outside Shower
Outside Corners
Under Membrane
3" min.
7 www.siouxchief.com
Installation Guide