Sioux Chief Push-Tite Flange Extension User Manual
Push-tite, Flange extension, Exclusive feature
Push-Tite
TM
Flange Extension
ITEMS NEEDED:
1. Pipe saw, tape measure, screws, screwdriver, primer, glue
2. Push-Tite Gasketed Closet Flange (887-GPM, 887-GAM)
3. 3" Sch. 40 ABS/PVC pipe
Step 1
Cut the hub of the Push-Tite, approximately 1¼"
up from the bottom lip of the hub.
This application is perfect for situations where a closet flange
needs to be added, and the 4" drain pipe is well below the finished floor.
Step 2
Measure the distance from the top of the drain pipe to the
top edge of the finished floor (this distance is X), then add
2" to this measurement.
Step 3
Cut a piece of 3" Sch. 40 pipe (X+2" long). Glue this piece
of pipe between the top and bottom halves of the Push-Tite
closet flange.
Step 4
Lubricate the gasket (use bowl wax, silicone, stem grease,
liquid soap, etc.) and push the pipe/flange assembly down
into the 4" drain pipe.
Step 5
Secure the flange to the floor with screws and
proceed with standard closet installation.
Exclusive
Feature!
SDv1-6/03 PUSH-TITE FLANGE EXTENSION © 2003 SIOUX CHIEF MFG.
- PEX F1807 (6 pages)
- CPVC Transition Fittings (2 pages)
- Frost-Proof Anti-Siphon SIllcock (1 page)
- Full-Slip Valve Tee - Add-A-Line (2 pages)
- Add-A-Line and Replace-A-Valve (1 page)
- Secondary Drain Funnel (2 pages)
- OxBox Fire-Rated Washing Machine Outlet Box (2 pages)
- Fire-Rated OxBox Outlet Box (1 page)
- OxBox Ice Maker Outlet Box (2 pages)
- Access Panel two piece plastic (2 pages)
- 868-15EXT (1 page)
- Undermount Hardware Kit (1 page)
- Planter Area Drain (1 page)
- 821 Series Shower Drain (1 page)
- DoubleDuty Test Plug (2 pages)
- Linear Shower Drain - StreamLine (16 pages)
- Linear Shower Drain - StreamLine - Full Mortar Bed (16 pages)
- 829 Series Shower Drain (1 page)
- 827 Series Shower Drain (1 page)
- 828 Series Shower Drain (1 page)
- 825 Series Shower Drain (1 page)
- ProCheck Backwater Valves (1 page)
- ProCheck Deep-Bury Adapter (1 page)
- PVC Transition Fittings - MetalHead (1 page)
- 108 Series Gas Ball Valve (1 page)
- 118 Series frost-proof anti-siphon sillcock (1 page)
- 521 Series multi purpose bracket (1 page)
- 521 Series Positioning bracket (1 page)
- 522 Series Universal Slider Bracket (1 page)
- 523 Series Galvanized Steel Saddle Clamp (1 page)
- 523 Series Overhead Bracketing System (1 page)
- 523-16 Series Universal Bracketing System (1 page)
- 523-24 Series Universal Bracketing System (1 page)
- 523-3MS Series Overhead Bracketing System (1 page)
- 524 Series Metal Hanger Strap (1 page)
- 525-02 SimpleStrap (1 page)
- 525 Series Bracketing System (1 page)
- 525 Series Strong Arm with Metal Bend Support (1 page)
- 525-P2M LockBlock Face Plate (1 page)
- 525-WLB Series StrongArm with Shower WallNut LockBlock (1 page)
- 544 Series Deck Anchors (6 pages)
- 550 Series TouchDown II (1 page)
- 555 Series Double-Duty Drive Hook TwinTalon (1 page)
- 555 Series Drive Hook TubeTalon (1 page)