Sioux Chief 555 Series Double-Duty Drive Hook TwinTalon User Manual
Polyethylene cts pipe fastener, 555 series tube talon
SPECIFICATION
Sioux Chief 555 Series Tube Talon
™
CTS pipe fasteners shall be used where
necessary to secure CTS tube in piping systems. Fastener shall be 100%
corrosion proof and U.V. resistant. Fastener shall be impact resistant to 0°F,
and be able to withstand continuous temperatures up to 160°F. Fastener
shall have a preloaded nail, which shall be rust resistant, zinc plated yellow
irradite. Preloaded nail shall have a continuous ring shank to provide a
more permanent installation. Fastener shall snap onto CTS tube for easy
installation, and shall allow for expansion and contraction of tube with less
noise. Fastener shall be designed to avoid tube damage if nail is over driven.
MATERIALS
fastener body: High density black polyethylene; 100% corrosion proof;
U.V. resistant; impact resistant to 0°F; max temp: 160°F
continuous.
nail: Rust resistant; zinc-plated yellow irradite; continuous ring shank.
MAXIMUM LOAD RATING
555-1: 3 lbs.
555-2: 5 lbs.
555-3: 8 lbs.
555-4: 12 lbs.
APPROVED USES
Manufacturer has approved the Tube Talon for use with: copper tube, CPVC
tube, PEX/PB tube, CSST lines, flexible gas tubing, plastic/steel conduit, low
voltage DataCom cable.
INSTALLATION
Manufacturer suggests the Tube Talon be installed in alternating directions
(so that the fastener’s nail is on alternating sides of the tube being
fastened) to ensure secure installation. Install fasteners at intervals
described in local plumbing code for the type of pipe or tube being fastened.
To install IPS tube, use the next larger size fastener, e.g. if you are fastening
½" IPS tube, use a ¾" fastener.
DIMENSIONS:
555-1
555-2
555-3
555-4
width
0.848" 1.125" 1.375" 1.6875"
A:
height
0.735" 0.875" 1.1875" 1.4375"
B:
depth
0.375" 0.375" 0.4375" 0.5"
C:
nail length
1.625" 1.625" 2.125" 2.375"
D:
hook height
0.468" 0.5625" 0.75"
0.9063"
E:
width to center of tube
0.5"
0.6563" 0.75"
0.9375"
F:
555-A
555 series
Tube Talon
™
A
TUBE SIzE
1 ⅜" CTS
□
2 ½" CTS
□
3 ¾" CTS
□
4 1" CTS
□
e.g. 555-3 = Tube Talon for ¾" CTS piping
POLYETHYLENE CTS PIPE FASTENER
555-2
A
F
B
E
D
C
Create Item Number
Sioux Chief Manufacturing Company • tel: 1-800-821-3944 • www.siouxchief.com • fax: 1-800-758-5950
Item # Submitted �����������������������������������
Job Name �����������������������������������������
Location ������������������������������������������
Engineer ������������������������������������������
Contractor ����������������������������������������
PO# �������������������� TAG ���������������������
11-08