Sioux Chief 523 Series Galvanized Steel Saddle Clamp User Manual
Galvanized steel saddle clamp
Create Item Number
GALVANIZED STEEL SADDLE CLAMP
523 SERIES
523-1A
e.g. 523-1B:
Saddle Clamp with 5" stainless steel snap-lock band
SPECIFICATION
Sioux Chief 523 Series SaddleUp™ DWV saddle clamp shall be used in conjunction
with stainless steel worm gear band where necessary for fastening piping or other
conduit. Saddle clamp may be used with the PowerBar™ adjustable bracket or
PowerBar™ Mini Strut, or may be fastened directly to building member. Clamp can
also be suspended using
3 8
" threaded rod to support pipe or thermal expansion
tanks when a stainless band penetrates through both sides of the saddle clamp.
Clamp shall be galvanized for corrosion resistance.
INSTALLATION
When used with the PowerBar brackets, thread the SaddleUp onto the bracket.
Fasten or secure the bracket as needed. Slide clamp to desired location along
bracket, and insert stainless steel band through slots in clamp. Wrap band around
pipe or conduit, insert tab into worm-gear mechanism and tighten as usual.
When mounted to wall or building member, fasten the clamp to a wall or other
building member with two screws (not provided). Be sure the screws used are long
enough to secure the intended load. Insert stainless steel band through slots in
clamp. Wrap band around pipe or conduit, insert tab into wormgear mechanism and
tighten as usual.
MATERIALS
16-gauge galvanized steel
DIMENSIONS
A: overall length
2.95" min.
B: overall height
0.875"
C: base length
2.625"
D: mounting hole diameter
0.188"
E: side to hole center
0.5"
F: mounting hole spacing
0.609" on center
G: end to hole center
0.704"
H: overall width
1"
I: slot width
0.700"
J: slot height
0.687"
K: center hole diameter
0.400"
SaddleUp
™
–
= Saddle Clamp Only
B
= 5" stainless steel snap-lock worm gear band
C
= 4" stainless steel snap-lock worm gear band
D
= 3" stainless steel snap-lock worm gear band
BAND SIZE A
523-1
A
C
H
B
D
I
E
J
F
K
G
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
8-14
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������