beautypg.com

Sioux Chief 528 Series Metal Hanger Strap User Manual

Metal hanger strap

background image

Create Item Number

METAL HANGER STRAP

524/528 SERIES

52A-BC

e.g. 524-50:

50 ft. coil of 24-gauge, galvanized steel hanger strap with alternating ¼" and " holes

SPECIFICATION

Sioux Chief metal hanger strap shall be used where necessary to support CTS, IPS
or DWV pipe. Metal strap shall be made from either galvanized or copper-plated
steel and installed in accordance with national codes pertaining to hanger spacing

and slope requirements. Metal hanger strap shall feature ¼" or " pre-drilled pilot
holes in alternating patterns and strap shall be ¾" wide.

INSTALLATION

Wear gloves and eye protection when handling metal hanger strap to avoid injury.
Cut hanger strap to desired length. Using approved hardware, secure hanger strap
with nail or screw to joist or stud member through pre-drilled pilot hole on strap.
Hanger strap may be looped or double wrapped around piping and may be installed
on same side or opposite sides of floor joists or stud members.

MATERIALS

524 series:

24-gauge galvanized steel

524-C series:

24-gauge copper-plated steel

528 series:

28-gauge galvanized steel

MAXIMUM LOAD RATING

24 gauge:

750 lbs.

28 gauge:

665 lbs.

SAFE WORKING TEMPERATURE

250°F

DIMENSIONS

A:

center-line of holes 1"

B: width

¾"

524-10C

524-10

3 16

3 16

3 16

3 16

4

= 24 gauge

8

= 28 gauge

10

= 10 ft.

50

= 50 ft.

25¹

= 25 ft.

100

= 100 ft.

_

= galvanized steel with alternating ¼" and " holes

C

= copper-plated steel with alternating ¼" and " holes

THICKNESS A

LENGTH B

MATERIAL/HOLE PATTERN C

¹Only available in 28-gauge, galvanized steel coils with alternating holes.

B

A

A

"

3

16

"

Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com

3-14

ITEM # SUBMITTED �����������������������������������������

JOB NAME �����������������������������������������������

LOCATION �����������������������������������������������

ENGINEER �����������������������������������������������

CONTRACTOR ��������������������������������������������

PO# ������������������������ TAG ������������������������

Made in USA

This manual is related to the following products: