Sioux Chief 108 Series Gas Ball Valve - Manual

Create Item Number
Gas Ball ValVe
108 serIes
108-1 a
e.g. 108-13: ¾" FIP gas ball valve
□ 2 ½" FIP
□ 3 ¾" FIP
a PIPe sIZe
INsTallaTION
Sioux Chief 108 Series manual gas shut off valves shall be used where required.
Valve shall have a cast brass valve body, chrome plated ball, and P.T.F.E. seats.
Valve shall be CSA certfied, manufactured in compliance with ANSI Z 21.15-92,
and UPC listed. Valve conforms to AGA standard 3-88 applicable to gas piping
between the meter outlet and the inlet valve connection of the gas appliance. This
standard does not apply to outdoor use.
Product installation and system testing shall be in accordance with NFPA 54 and
ANSI Z223.1 and the 2009 National Gas Fuel Code.
MaTerIals
VALVE BODY: Cast brass
BALL: Chrome plated brass
SEATS: Polytetrafluoroethylene (P.T.F.E.)
HANDLE: Zinc
SCREW: Nickel plated steel
CONNeCTION
FIP
BTU raTING
108-12 (1/2" valve) = 300,000 BTU/HR
108-13 (3/4" valve) = 455,000 BTU/HR
TeMPeraTUre raTING
Minimum: 32˚F / 0˚C
Maximum: 125˚F / 51.6˚C
DIMeNsIONs
108-12 108-13
Connection ½" FIP ¾" FIP
A: overall height 1.80" 2.125"
B: overall length 2.17" 2.43"
C: centerline to top 1.28" 1.52"
of handle
521-851 521-852
A: overall length 20" 26"
B: overall height 2.375" 2.375"
C: number of ½" CTS notches 7 11
D: distance between ½" CTS notches 2" on-center 2" on-center
E: number of ¾" CTS notches 6 10
F: distance between ¾" CTS notches 2" on-center 2" on-center
G: number of ½" CTS holes 7 11
H: distance between ½" CTS holes 2" on-center 2" on-center
I: number of ¾" CTS holes 3 5
J: distance between ¾" holes 4" on-center 4" on-center
K: number of 1" CTS holes 3 5
L: distance between 1" CTS holes 4" on-center 4" on-center
M: nail hole diameter 0.19" 0.19"
material thickness 0.048" 0.048"
B
A
C
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
ITEM # SUBMITTED
JOB NAME
LOCATION
ENGINEER
CONTRACTOR
PO# ________________________ TAG
8-12