Sioux Chief 555 Series Drive Hook TubeTalon User Manual
Polyethylene cts isolating drive hook
Create Item Number
POLYETHYLENE CTS ISOLATING DRIVE HOOK
556 SERIES
556-AB
e.g. 556-2S:
½" CTS PickUp Talon with screw
1
=
3 8
" CTS
2
= ½" CTS
3
= ¾" CTS
4
= 1" CTS
5
= 1¼" CTS
_
= black body with nail
C
= ivory body with nail (for CPVC)*
S
= black body with screw*†
HSDR
= black body with hex-head screw*†‡
TUBE SIZE A
OTHER OPTION B
SPECIFICATION
Sioux Chief 556 series PickUp Talon™ CTS pipe fasteners shall be used where
necessary to secure CTS copper, PEX, or CPVC tube in piping systems. Fastener shall
be 100% corrosion proof and U.V. resistant. Fastener shall be impact resistant to
0°F, and be able to withstand continuous temperatures up to 160°F. Fastener shall
have a preloaded nail or screw which shall be rust resistant, zinc plated or stainless.
Preloaded nail shall have a continuous rink shank to provide a more permanent
installation. Fasteners shall protect tube from abrasive mounting surface and help to
eliminate ticking noises. Fastener shall snap onto CTS tube for easy installation and
shall allow for expansion and contraction of tube with less noise. Fastener shall be
designed to avoid tube damage if nail or screw is over driven.
INSTALLATION
Manufacturer suggests that the PickUp Talon be installed in alternating directions (so
that the fastener’s nail or screw is on alternating sides of the tube being fastened to
ensure secure installation). Install fasteners at intervals described in local plumbing
code for the type of pipe or tube being fastened. To install IPS tube, use the next
larger size fastener, e.g. if you are fastening ½" IPS tube, use a ¾" fastener.
MATERIALS
Body:
U.V. protected high density polyethylene
Nail:
Zinc-coated ring shank
Screw:
Zinc-plated corrosion resistant
#6 × 1¾" Phillips pan head, self-drilling tip (556-2S model only)
#6 × 2" Phillips pan head, self-drilling tip (556-3S model only)
#6 x 3" Phillips pan head, self-drilling tip (556-5S model only)
Hex-head screw:
corrosion resistant, self-drilling tip
#6 × 1½", ¼" hex head (556-2HSDR only)
#8 × 1¾", ¼" hex head (556-3HSDR only)
SAFE WORKING LOAD
556-1
556-2_
556-3_ 556-4_ 556-5_
9 lbs.
12 lbs.
16 lbs.
24 lbs.
25 lbs.
SAFE WORKING TEMPERATURE
Impact resistance to 0°F (18°C)
Maximum temperature: 160°F (71°C)
DIMENSIONS
556-1
556-2_
556-3_
556-4_
556-5
A: length
0.93"
1.12"
1.39"
1.82"
2.13"
B: height
0.828"
1.019"
1.378"
1.808"
2.26"
C: width
0.35"
0.38"
0.4"
0.45"
0.71"
D: nominal tube size
3 8
"
½"
¾"
1"
1¼"
Made in USA
556-2
Patent # 7,207,530
PickUp Talon
™
*Not available on
3 8
" CTS models
†Not available on 1" CTS models
‡Not available on 1¼" CTS models
A
B
D
C
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
4-14
ITEM # SUBMITTED _________________________________________
JOB NAME _______________________________________________
LOCATION _______________________________________________
ENGINEER _______________________________________________
CONTRACTOR ____________________________________________
PO# ________________________ TAG ________________________