Inserting/removing procedure, Chart plotter dimensions, Inserting the c-card – Seiwa Tigershark Plus User Manual
Page 90: Removing the c-card

92
User Manual
♦
Display Resolution
: 640 x 480 pixels
♦
Cartography
: C-MAP C-CARD
♦
Operating temperature range : 0/+55 degrees Celsius
♦
Memory
: Non volatile with battery backup
♦
Keyboard
: Silicon rubber, backlight
♦
Weight
: 1,6 Kg
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
External bracket and I/O cable 1,5 mt/5.9"
♦
AUX IN I/O cable 1,5 mt/5.9"
♦
Chart plotter's protective cover
♦
Fuse 2 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
INSERTING/REMOVING PROCEDURE
Inserting the C-CARD
Hold the C-CARD by the short inclined side so that you can see the C-MAP label.
Open the door, gently push the C-CARD into one of the two slots; push the C-CARD
in as far as it will go, then close the door to hold fixed into the slot.
Removing the C-CARD
Open the door and remove the C-CARD out of one of the two slots (as shown in
the right side of the previous picture).
CHART PLOTTER DIMENSIONS
140 [5.5”]
261 [10.3”]
45
[1.8
”]
40
[1.6
”]
47
[1.9
”]
125 [4.9”]
329 [13”]
230.5
[9.1
”]
221
[8.7
”]
160.2
[6.3
”]
212 [8.4”]