Seiwa Tigershark Plus - Manual (Page 75)

77 User Manual
C-COM GSM Plus Connection
To connect the modem C-COM to the chart plotter with quick disconnect bracket
follow the procedure:
1. Cut the C-COM cable about 1.96" [5 cm] from the "T" connector:
C-COM Cable
2. Connect the wires to the quick disconnect bracket cable as follows:
Connection for the Port 1
Beacon Receiver Connection
BARRACUDA iGPS (Internal GPS Receiver)
NOTE For BARRACUDA: To connect a Differential Beacon Receiver see previous
figure "GPS Connection BARRACUDA" (External Smart GPS Receiver) .