Seiwa Tigershark Plus - Manual (Page 14)

16 User Manual
the chart plotter as a navigation aid, charts with detailed information for the area you
wish to navigate are required. This chart cartridge is called C-CARD. See the Chapter
related to your chart plotter for inserting/removing C-CARD procedure.
NOTE During normal operations the C-CARD should not be removed since the chart
plotter may lock up.
1.7 SIMULATION MODE
The built-in Simulator function allows you to become proficient in the use of the
chart plotter. It simulates the reception of the navigation data (Lat/Lon, Course,
Speed, date, time). The simulated ship's position is placed at the current cursor
position by the time the simulation is activated.
To start the Simulator:
Place the cursor at your desired position + [MENU] + [MENU] + "ADVANCED"
+ [ENTER] + "SIMULATION MODE" + [ENTER] + "SIMULATION MODE" +
[ENTER] + "ON" + [ENTER]
You might insert the Speed, Heading, date and time values:
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "SIMULATION MODE"
+ [ENTER] + "SPEED"/"HEADING"/"DATE"/"TIME" + [ENTER] + enter val-
ues + [ENTER]
To select the Cursor Control in Chart page use the cursor up/down to adjust the
Speed and the cursor left/right to adjust the Course:
[MENU] + [MENU] + "ADVANCED" + [ENTER] + "SIMULATION MODE" +
[ENTER] + "CURSOR CONTROL" + [ENTER] + "ON" + [ENTER]
1.8 CONTROLLING THE DISPLAY
This paragraph describes how to change the display mode and how to move
around the chart by changing the chart scale.
Changing Display Mode
[MENU] + [MENU] + "PAGE" + [ENTER] + select the desired page + [ENTER].
The selected page appears.
BARRAMUNDI/BARRAMUNDI P
LUS
/MARLIN:
[DATA] + select the desired page + [ENTER]. The selected page appears.
MURENA/MURENA
I
GPS:
The page configuration may be different in the boxes position.
MARLIN:
If you have selected a Video Input (see Par. 3.4.1), in the Chart page a window with
the picture captured from the video signal source is shown.
NOTE If the Fish Finder device is connected, four displaying pages are available too.
See the Fish Finder User Manual for more information.