Inserting/removing procedure – Seiwa Tigershark Plus User Manual
Page 78

80
User Manual
♦
Display Resolution
: 800 x 480 pixels
♦
Cartography
: C-MAP C-CARD
♦
Operating temperature range
: 0/+55 degrees Celsius
♦
Memory
: Non volatile with battery
backup
♦
Keyboard
: Silicon rubber, backlight
♦
Weight
: 1,1 Kg
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
External bracket and I/O cable 1,5 mt/5.9"
♦
Chart plotter's protective cover
♦
Fuse 2 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit
(STARFISH E)
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
(STARFISH E)
INSERTING/REMOVING PROCEDURE
Remove the front cover as explained in the following pictures. Hold the C-CARD
by the long inclined side so that you can see the C-MAP label. Gently push the
C-CARD into the slot; push the C-CARD in as far as it will go to hold fixed into the
slot and place the front cover again.
TO UNLOCK FRONT MASK PULL HERE
Removing the front cover