RADWAG PUE C41H Indicator - Manual (Page 85)

22.5. Backlight
According to the requirements (e.g. intensity of external light)
it is possible to:
• Switch on/off or set the backlight operation to AUTO – when supplied
from mains,
• Change the backlight intensity in the scale of 0% to 100% - when
supplied from an accumulator (lower backlight intensity increases
the operation time when supplied from the accumulator).
22.5.1. Backlight – power supply from mains
Procedure:
• Enter
according to 11.2. and then:
NO - backlight switched off
YES - backlight switched on
AUTO - backlight switched off automatically
Return to weighing:
See 11.3.
- 85 -