RADWAG PUE C41H Indicator - Manual (Page 109)

• Use a keyboard to enter a maximum value for the process and confirm
it by pressing .
Notice:
The introduced maximum value for corrections is intended to limit the range
of operation for automatic calculation of correctional value.
Return to weighing:
See 11.3.
24.8.6.4. Averaging from subsequent dosing cycles
In parameter users can set a number of
subsequent dosing cycles to consider for calculating the correctional value.
Averaging is always calculated form subsequent dosing cycles.
Procedure:
• Enter
and then:
• Enter the required number of dosing cycles using the scale keyboard
(acceptable settings are 1 to 10) and confirm it by pressing .
Return to weighing:
See 11.3.
- 109 -