RADWAG PUE C41H Indicator - Manual (Page 11)

Notice:
In accordance to the number of mounted modules the number and the
placement of glands and connectors can vary. Connectors and glands
mentioned in the standard solution appears in every option in the same
place regardless of the option.
6. UNPACKING AND MOUNTING
A. Take the device out of the package,
B. Put the scale on an even stiff ground,
C. Level the platform using an external or internal level condition
indicator. Use levelling feet to do it.
7. GETTING STARTED
• Switch off the scale using
– keep pressing it for about 0.5 sec,
• Wait for the test completion,
• Then you will see zero indication and following pictograms displayed:
- zero
- equilibrium
kg - weight unit
If the indication is not zero – press zero button.
- 11 -