RADWAG PUE C41H Indicator - Manual (Page 108)

• Use the scale keyboard a starting correction value and confirm it by
pressing .
Notice:
1. The starting correction value is estimated experimentally in at least 2
subsequent cycles of dosing;
2. In correction mode , the start correction is always the
correction value, but in correction mode the declared start
value is used only in the first dosing cycle. Then it can be modified.
Return to weighing:
See 11.3.
24.8.6.3. Maximum correctional value
The introduced maximum value in parameter CORRECTION>for corrections is intended to limit the range of
operation for automatic calculation of correctional value.
Procedure:
• Enter
and then:
- 108 -