WIKA CF1H - Manual (Page 58)

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 58 -
10.5 Mounting
• When using the One-touch type mounting bracket
Mounting panel thickness is 1 … 3 mm.
Mount one-touch mounting bracket 1 1
to the body in advance, and then
Insert the CF1H 2 from the front of the panel.
If Soft front cover is used,
the mounting panel thickness will be 1 … 2.5 mm.
2
[Fig. 10.5-1]
1
• When using the Screw type mounting bracket [Option code: FS]
Mounting panel thickness is 1 … 15 mm.
Insert the CF1H from the front of the panel.
Slot the mounting bracket to the holes at the top and bottom of the case,
and screw in place.
Notice
As the case is made of resin, do not use excessive force while screwing in the
mounting bracket. The torque is approximately 0.12 Nm.
[Fig. 10.5-2]