WIKA CF1H - Manual (Page 33)

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 33 -
Output selection when Mode to select the control output OFF or not when
input burnout DC input is over scale or under scale.
Selected value
MODE
Control output OFF
Control output ON
[Factory adjusted as Control output ]
PV/SV display mode
Actual Main setting
temperature value
Energized/Deenergized function
[If the alarm action energized is selected]
When the alarm output action indicator is lit, the alarm output (terminal - , - ) is conducted (ON).
When the alarm output action indicator is unlit, the alarm output is not conducted (OFF).
[If the alarm action deenergized is selected]
When the alarm output action indicator is lit, the alarm output (terminal - , - ) is not
conducted (OFF). When the alarm output action indicator is unlit, the alarm output is conducted (ON).