WIKA CF1H User Manual
Page 35
Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007
- 35 -
PV/SV display mode
Actual Main setting
temperature value
+ for approx. 3 s
Program control change
Control form is changed between Fixed value
Setting value of
and Program.
fixed value control
MODE
MODE
In Fixed value control, if the MODE key is pressed,
the mode will revert to the PV/SV display mode.
(Fixed value
control)
Fixed value control
Program
control
[Factory adjusted as Fixed value control]
Following dislay is available only when Program control.
Step 1 Time setting
Mode to set the Time for step 1.
Setting value
00.00
Minute
indication
MODE Hour
indication
For example, when setting 1 hour 58 minutes,
set
as
[
].
Setting range: 00.00 … 99.59
[Factory adjusted as 00.00]
Step 2 Time setting
Mode to set the Time for step 2.
Setting value
[The setting range and the factory adjusted value
are the same as Step 1.]
MODE
Step 3 Time setting
Mode to set the Time for step 3.
Setting value
[The setting range and the factory adjusted value
are the same as Step 1.]
MODE
Step 4 Time setting
Mode to set the Time for step 4.
Setting value
[The setting range and the factory adjusted value
are the same as Step 1.]
MODE